ACTERNA TEST & MEASUREMENT SOLUTIONS
- Test Equipment Solutions Datasheet Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of. Manuals and accessories required for normal operation. JDSU, MTS-6000A V2, OPTICAL FIBRE TEST, COMPACT NETWORK TEST PLATFORM, Used, Second User, Refurbished, Rental, Hire, Used Test Equipment, Buy Test.
- Instructions for returning waste equipment and batteries to JDSU can be found in the Environmental section of JDSU’s web site at www.jdsu.com. If you have questions concerning disposal of your equipment or batteries, contact JDSU’s WEEE Program Management team at [email protected].
- The Viavi Solutions T-BERD/MTS-6000A (V2) is the industry’s most compact, lightweight test solution for modern and future high-speed transmission network deployments. This installation and maintenance platform empowers field technicians with its uniquely combined physical, optical, and transport/Ethernet testing capabilities.
6000A will automatically loop down the far end JDSU loopback device. Save Results At the conclusion of the test, enter Customer name, Technician Name, Test Location, and Comments at the prompt. Select the Append option, and tap Yes to save the test report to the T-BERD 6000A hard drive in PDF format. T-BERD 4000 JDSU T-BERD 6000 Family. User Manual Extra Battery Jdsu tberd 6000a with e8136lr long range otdr 8136 lr 1310 1550 nm at t-berd Agilent hp e6000b e6003a sm fiber otdr e6000. Jdsu T-berd 6000 Otdr Manual CLICK HEREJDSU, MTS 5800, and T-BERD 5800 are trademarks.
MTS-8000 Portable Optical Network Tester
All your optical network testing needs covered in a single platform
The power of one, performing the work of many
Apowerfulunit
•Flexiblescalableplatform
•Industry-leadingsizeandweight,e.g.plat- form+transportmodule<7kg
•Interchangeablemodules
•Generatestestresultsinseconds
•Fullyautomatictesting
•Combinationofseveraltests
•Remotelycontrolled(viaEthernet,Fiber)
FiberCharacterizationTesting
•OpticalTimeDomainReflectometer (OTDR)
•ChromaticDispersion(CD)
•PolarizationModeDispersion(PMD)
•AttenuationProfile(AP)
•Losstesting
OTDRModule
•Morethan20OTDRmodules
•CombinedwavelengthsMM:850/1300 SM:1310/1383/1550/1625nm
•Dynamicrange30dBupto50dB
Pass/FailOTDRanalysis
TransportModule | |
• Allinonemodulefor | CWDM/DWDMTesting |
FullPDH/T-Carrier&SDH/SONETtest- | |
ingupto10Gb/s | • OSAwithfrequencyrangefrom1250nmto |
Ethernettesting10/100/1GigE/ | 1650nm |
10GigELAN&WANuptotheIPlayer | • DWDMparametersOSNR,opticalchannel |
DispersionModules | power,wavelengthdeviation |
• ApplicationforEDFAandDFBtesting | |
• PMD–PolarizationModeDispersion | |
• ChannelisolationforBERanalysis | |
• CD–ChromaticDispersion | • Singleordualportanalyzer |
AmplifiedDWDMsystemanalysis | |
WEBSITE: www.jdsu.com/fiberoptictest |
MTS-8000 Tester
2 | |||
Fiber Characterization | Automaticbi-directional | Built-inOpticalTalkset | |
measurementfunction | • Datatransfercapability:fileexchangeor | ||
• Automatetheacquisitionprocess | remotecontrol | ||
• Usedalsoforfullyautomaticbi-directional | |||
• Checkfibercontinuity | |||
measurements | |||
• Filetransferthroughthefiber | |||
• OTS-55handheldforfarendcommunica- | |||
• Truesplicelosswithbothendanalysis | |||
tion | |||
• Opticaltalksetoptionneeded | |||
Data | |||
Tested fiber | |||
Bi-directionalOTDRanalysis | Remote |
PCsoftwaresolutionforreportgeneration
OFS-100ResultsAnalysis
•OTDR,CD,PMD,AP,andOSAresults analysis
•Batchprocessingcapabilityviaautomation process
•Pass/Failfunction
•Customizedprintouts
OFS-200FiberCableAcceptance
ReportGeneration
•Completefibercharacterizationreporting capabilityincludingbi-directionalOTDR, CD,PMD,AP,ILandORLresults
•AdvancedOTDRevaluationforloopback andmid-pointmanagement
•Powerfulreportpreview
•Directaccesskeysforeasyprocessand e ciency
PMDtestresultswithPass/Failanalysis
DUT
Polarized
Broadband
Source
MTS-8000 00439 | |
Local | UHD 1310/1550/1625 nm |
MTS-8000 00286 | |
UHD 1310/1550/1625 nm |
PhysicalFiberTesting
KeyfeaturesOTDR
•FastdataacquisitionenablesVHDplug-in toreach40dBafter10swithamaximum performanceupto45dB
•Highestdynamicrangewith50dBat 1550nm,UHDmodule
•NewVLRmodulewithoutstandingdead zoneof0.8mEDZand4mADZ,43dB dynamic
•Fastestscanspeedat0.1sinreal-timemode
•Upto128000acquisitionpointswithsamplingresolutiondownto4cm
PMDModule
•Fixedanalyzermethodstandardizedby ITU-T,IECandTIA/EIA
•Fastmeasurementtime–fromjust 6seconds
•MeasurethroughmultipleEDFAs
Analyzer OSA
CDModule
•PulsedelaymethodcomplieswithTIA/EIA FOTP-168
Mts 6000a
•Fastsingle-endmeasurementwithsectional analysiscapability
•CDanalyzerandfour-wavelengthOTDR (1310/1480/1550/1625nm)withonemodule
Singlemenuforchromaticdispersiontraceandtable display
1 | 1 | |
1 | 1 | 2 |
1 | 3 | |
4 |
PulsedelaymethodcomplieswithTIA/EIAFOTP-168
SecondaryPortBank
•10/100/1000Mb/sEthernet
•1GigETx/Rx(850nm,1310nm,1550nm)
PrimaryPortBank | |
• 2.5Gb/s,622Mb/s,and155Mb/sSDH/SONET | |
Tx/RX(1310nm,1550nm) | 10Gb/sPortBank |
• 10/100/1000Mb/sEthernet | • 10Gb/sSDH/SONET(1310nm,1550nm) |
• 1GigETx/Rx(850nm,1310nm,1550nm) | • 10GigELAN&WAN(850nm,1310nm,1550nm) |
OpticalConnectionCheckInterfaces | PortBank#4 | PortBank#5 |
• Highaccuracypowermeter | • T1andE1balancedand | • E3,DS3,STS-1,E4Tx/Rx |
• Continuouswavepowersource | unbalancedTx/Rx | • STM-1(e)Tx/Rx |
• Visualfaultlocator |
TransportModule
•Containedinone5cmmodule
–PDH/T-carrierinterfacesinclude DS1,E1,E3,DS3,E4,STS-1andSTM-1e
–SDH/SONETinterfaces(1310nm,1550nm)include 155Mb/s,622Mb/s,2.5Gb/s,10Gb/s
–Ethernetinterfaces(850nm,1310nmand1550nm) include
10/100/1000Mb/selectricaland1GigEOptical
–10GigELAN+WAN
Jdsu Users Manuals Downloads
•Only2.5kgfullypopulated,totalweight<7kg
•Fullyscalabletomeetyourcurrentandfutureneeds
•Opticalandelectricalsignallevelmeasurements
•Upto2.5hoursat10Gb/srateswithonebattery (2batteriespossible)
•Fieldexchangeableconnectorsforallstandardconnector types
•SDH/SONETtesting
![Test Test](/uploads/1/3/3/8/133812550/650476619.jpg)
–Mixedpayloadgenerationandanalysis
–Concatenatedsignals
–AutomaticProtectionSwitching(APS)
–Overheadbytemanipulationandanalysis
–RoundTripDelay(RTD)
•Ethernettesting
–SingleanddualportEthernetconfi guration
–TestingonLayer1,2and3(IP)
–VLANsupport
–Constant,burstandramptra cgeneration
–Tra cfi ltercapabilities
–AutomatedRFC2544testing
–Loop-up/loop-downoffarenddevice
MTS-8000 Tester
ConnectorInspectionScope
•FiberConnectorInspectionConnectors
•Patchpanelinspection
•250or400magnification
•UsesMTS-8000largescreen(10.4”)
•Comparisonwith3otherimagesonthesame screen
EFSCOPE250,EFSCOPE400:Opticalvideoinspectionprobe
InsertionLossMeasurements | Built-in635nmVisualFaultLocator | Alternatively |
• PowermeterintegratedinMTS-8000 | • Universalpush/pullforall2.5/1.25mm | OVF-1ballpen-sizedseparatevisualfault |
mainframe | locator | |
• Multi-wavelengthlasersourcewithCWor | ||
modulatedsignals | ||
• Easylossmeasurementsofajumperor | ||
patchcord | OTS-55SMARTOpticalTalkset | |
• ≥45dBdynamicrange | ||
• Wavelengthofoperation:1550nm |
Accessories
E80HCase5:Hardcarryingcasefor | E80SCase3:Softcarryingcasefor | E80keyB:USBkeyboard |
singlemoduleconfiguration | singlemoduleplatform |
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, andnoresponsibilityisassumedforanyinaccuracies.Theuserassumesallrisksandliabilitywhatsoeverinconnectionwiththeuseofaproductoritsapplications.JDSUreservestherighttochangeatanytimewithoutnotice thedesign,specifications,function,fitorformofitsproductsdescribedherein,includingwithdrawalatanytime of a product o ered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarksof JDSUniphase Corporation. Other trademarksarethepropertyof theirrespective holders.
© 2006JDSUniphaseCorporation.Allrights reserved.
NORTH AMERICA | LATIN AMERICA | ASIA PACIFIC | EMEA | WEBSITE: |
TOLL FREE: 1 866 228 3762 | TEL:+55 11 5503 3800 | TEL:+852 2892 0990 | TEL:+49 7121 86 2222 | www.jdsu.com/fiberoptictest |
https://brownhi136.weebly.com/the-spa-facial-by-conair-user-manual.html. FAX: +1 301 353 9216 | FAX:+55 11 5505 1598 | FAX:+852 2892 0770 | FAX:+49 7121 86 1222 |
To continue the download you need to go through the captcha:
Advertising
T-BERD 6000
Compact Optical Test Platform
Key Features
• Compact, lightweight, and highly integrated
• Over 40 application modules already supported
• Choose from IL/ORL, OTDR, PMD, CD, or WDM plug-in
modules
• Compatible with plug-in modules from the MTS-5100
1
and
T-BERD 8000
• Comprehensive connection checker functionality with
![Users Users](/uploads/1/3/3/8/133812550/791409567.jpg)
built-in VFL, power meter, LTS, and video inspection scope
options
options
• Built-in optical talkset option for communicating along the fiber
• Data mode on the talkset allows for the configuration,
testing, and results collecting of two remote units
• Exceeds Telcordia specifications for ruggedness, drop
testing, and extended battery life
WEBSITE
:
www.jdsu.com/test
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
JDSU’s T-BERD 6000 is a compact and lightweight test platform designed for the
installation and maintenance of fiber networks. It provides field service
technicians with the highest levels of performance and upgradeability on the
market today.
installation and maintenance of fiber networks. It provides field service
technicians with the highest levels of performance and upgradeability on the
market today.
Modular in design, the T-BERD 6000 offers an extensive portfolio of test
functionality with over forty different fiber modules supporting a wide range of
applications. The versatility of the T-BERD 6000 allows technicians to standardize
using one type of test equipment and then introduce new testing capabilities in
the field without incurring additional costs.
functionality with over forty different fiber modules supporting a wide range of
applications. The versatility of the T-BERD 6000 allows technicians to standardize
using one type of test equipment and then introduce new testing capabilities in
the field without incurring additional costs.
Since the T-BERD 6000 is compatible with our existing fiber module product line,
technicians can exchange plug-in modules between the T-BERD 8000 Multiple
Network Test Platform and the T-BERD 6000, in the field and without the need
for additional tools. To ensure the highest level of return on your test equipment
capital investment, existing OTDR modules from the MTS-5100 can be
transformed (with an extension) for use with the T-BERD 6000.
technicians can exchange plug-in modules between the T-BERD 8000 Multiple
Network Test Platform and the T-BERD 6000, in the field and without the need
for additional tools. To ensure the highest level of return on your test equipment
capital investment, existing OTDR modules from the MTS-5100 can be
transformed (with an extension) for use with the T-BERD 6000.
1 Compatible with the MTS-5100 line of MM, SR, DR, HD, and VHD OTDR modules
Highlights
– Superior value for the money
– Higher return on investment
– More flexibility for future
testing needs
– Unprecedented speed and power
– Greater productivity
Advertising
Popular Brands
Popular manuals